Mine Belt Loader

Our company produces LP600Т and LP800Т belt loaders of standard sizes—for receiving, transporting, and loading a mined rock from the conveyor of the roadheader to the belt conveyor in the development faces with different performance and belt speed. 

 

Structurally, the loaders are manufactured in two basic versions: suspended (on a monorail) and floor-mounted (on portal racks).

LP600Т.05.05.000 Unloading-Drive Section

The unloading-drive section is made as a spatial truss with a left, right, or coupled drive arrangement.

The drive is of geared-motor type with power from 15.5kW to 22kW.

Diverting rollers are installed to center the belt

A flow shaper is installed at the drive end.

LP600Т.02.00.000 Intermediate Section

Intermediate section is made as a spatial truss. Diverting rollers are installed to center the belt.

LP600Т.03.00.000 Loading Section

The section is made as a frame structure. Depending on the order, it can be completed with wheel pairs, skis, or a tow hitch.

It is complete with shock-absorbing rollers and tensioning screw unit.

LP800Т.05.05.000 Unloading-Drive Section

The unloading-drive section is made as a spatial truss with a left, right, or coupled drive arrangement. The drive is of geared-motor type with power from 15.5kW to 22kW.

Diverting rollers are installed to center the belt. A flow shaper is installed at the drive end.

LP800Т.02.00.000 Intermediate Section 3d  

Intermediate section is made as a spatial truss. Diverting rollers are installed to center the belt.

LP800Т.03.00.000 Loading Section

The section is made as a frame structure. Depending on the order, it can be completed by wheel pairs, skis, or a tow hitch.

It is complete with shock-absorbing rollers and tensioning screw unit.


©2021 ООО ОСК-Технолоджи. Все права защищены